Step 1 Using a pair of Channel Locks clamp on clutch end and pivot clutch end toward motor then remove clutch cable end from clutch end.

Step 2 Now install ez-clutch onto clutch end and tighten ez-clutch to clutch end with set screw.

Step 3 Using Channel Locks again pivot ez-clutch toward motor and replace clutch cable end back into ez-clutch and return to normal position.

Step 4 Use clutch cable adjuster to adjust clutch to correct position.

NOTE: If cable end does not slide freely into clutch assist do not force into easy clutch. Some cables may have rough ends and are unfinished. Use a small file and remove any excess metal so the cable will slide into the clutch end.

Please email with any questions orders@victoryonly.com