rear led light kit
Our all new Jackpot rear LED turn signals have been completely redesigned!

They’re made from injection molded DOT grade lens material with the LEDs (150 of ‘em, 75 each side!) sealed in place. Stainless steel mounting arms bolt the unit directly into place on the fender for a perfect fit. Visibility is awesome (smoked lens output is slightly lower than the red and clear) and provides an additional safety benefit with its wraparound design. It’s so extremely low profile you won’t even know it’s there until you turn it on.
Now for the best part, you’ll have your choice of 7 different models, with 4 different lens colors, 3 of them available with either amber or red LEDs.

Lifetime warranty against LED failure on new injected molded design.

 Note: A load equalizer will be need to maintain stock flash rate if both front and rear turn signals are replaced with LEDs, only one load equalizer is needed for Victory Motorcycle with self canceling turn signals.

front bracket style led kit 

Our newly redesigned  bracket style is made from highly polished aluminum (you’ll swear it’s chrome) and uses 15 of the highest quality amber  LEDs per side, and directly bolts on to the headlight bucket mounting bolt.  It completely covers and cleans up the bottom of the triple tree (Please see installation note below).  The purchase of a Load Equalizer is required to maintain the stock flash rate and use of the four-way flashers.  These units are very low profile (you won’t even know they’re there until you turn it on) and are available only in amber LEDs with clear tubing. 

These products are not DOT approved. Use at your own risk, we are not responsible for any damages or losses incurred while using our products.

Use of these products may be limited, regulated or prohibited in your state, please check all applicable motor vehicle code and laws before ordering

front wrap around led turn signal  

Clean up the front of your bike with these sleek new one of a kind billet LED fork wrap-arounds. Each unit contains 30 high quality super bright amber LEDs that are integrated into a super sleek billet CNC aluminum fork wrap, that provides excellent visibility with its wrap-around coverage.  These LEDs have a 120 degree viewing angle for maximum visibility and come with a lifetime warranty against LED failure. If you would like your new LED Fork Wrap-Arounds to function as both a running light and a turn signal

wizard light kit  

You no longer have to be stuck with just one color of LED accent lights on your motorcycle. Now you can choose any one of 7 cool colors: Red, Green, Blue, Purple, White, Teal, or Amber. Can't decide what color you want? Have them all with the new Color Fade feature that slowly fades from one color to the next!

 Each Wizard Pod contains 6 super bright wide angle LEDs, Each LED is made up of 3 die - Red, Blue, and  Green, for a total of 18 LEDs. No other LED Pod (color changing or not) on the market today has this many individual LEDS per unit! The best part about the Magical Wizard Lights™  is that all functions are controlled with our new remote control Color Command™ module. The Color Command™ module  allows Total Control In the Palm of Your Hand™  - you can  select one of three strobe functions, the slow Breathe function, and the Color Fade function with the Color Command™ remote control.   In all, you have a total of 36 functions and can control these functions from up to 100 feet away with the Color Command™ unit.

Love blue lights but they are not legal in your state? No problem, Just hit the button on the Color Command™ Module and change to another color for your ride. After you stop and park your bike in front of your favorite hang out, change the lights back to blue with the Color Command™ Module.

  Our new LeverLockz™ Installation Kit featuring Cage Clamp® Connectors " Makes Installation as Simple as a Click™". Each Cage Clamp® can connect 1-15 wires together; so you can connect up to 15 Wizard Pods with no soldering and no special tools. Need to add a new pod? No problem, just lift the lever, insert the new wire, and click.  New Pods can be added in less than 5 minutes.  Each Wizard pod comes pre-taped with 3M double sided tape and 36" of wire with a black sheathing for a truly simple but custom installation.

flame jackpot light kit 

Item # 432. These NEW 1-1/2 inch Halogen bullet lights have 3 Dimensional FLAME Bezels!  These lights are UNIQUE in the motorcycle market place! Chrome flame licks sparkle beautifully in the light!  They are CAD designed and then perfectly cut by a precision CNC lathe and mill from 6061-T6 Billet Aluminum and then mirror polished before they are triple chrome plated. Completely concealed clean assembly, no screws are used to hold these together, super slick and clean custom look. For Use as a turn signal or tail light or whatever your imagination can come up with!  This kit comes with 8mm hollow mounting bolt.  You simply won't find a nicer, more unique, or more beautiful bullet light.  Fits all motorcycles!

rear led light upgrade kit 

Jackpot or Vegas LED Chrome Tail Light

Features
Fits Jackpot & Vegas
Complete light - no cutting or gluing required!
Chrome Bezel
Looks Cool!
Increased Visibility
Increased Safety
Upgrade your stock Victory taillight to this new super bright LED unit. A simple 30 minute installation to upgrade from the existing one LED stock unit to a multi LED unit. Also backed by a lifetime LED warranty. Make sure you purchase our plug & play 12 volt adapter kit (TLA-12V)to complete your installation. *No returns on electrical components.

Item #TLC-VIC