2) Install new back plate with 2 flat head screws from stock cover. ( Use Blue Loctite on screws)
3) Install Black Backing Plate and line up 4 holes to holes in back plate. ( a dab of grease will hold it in place)
4) Install Design plate this is the Skull and Cross Bones design. ( install 1 of the 4MM screws to hold it inplace)
5) Using a little Blue Loctite install the other 3 screws and tighten, remove first screw and
6) Clean it up with a soft cloth and some good chrome wax and it should look like this :tu
