Description

Tank Strap Bib Steel Frame Cruisers

Black Classic Tuxedo Tie gas tank divider for the Victory Vegas, Kingpin, Judge, Boardwalk and other cruisers.

This Tuxedo Tie enhances the Victory cruiser gas tank and provides wearand scratch protection.

The Black Classic Tuxedo Tie comes with a generous 7 ¼” x 4 ½” x 1 ½” storage pouch that easily accommodates your cell phone behind a clear pocket and stores other items you need handy in the main pouch.

The pouch can beeasily removed using a simple twist and replaced with numerous other accessory options

Madein the USA.

BLACK CLASSIC TUXEDO TIE, Tank Divider EZ Mount Pouch,

Fits Victory Cruisers 2004 2016, Vegas, Kingpin, Judge, Boardwalk, Gunner, Highball, Jackpot, Hammer

Made in USA

storage pouch that easily accommodates your cell phone behind a clear pocket and stores other items you need handy in the main pouch. The pouch can beeasily removed

Tank Strap Installed on Victory Motorcycle

storage pouch that easily accommodates your cell phone behind a clear pocket and stores other items you need handy in the main pouch. The pouch can beeasily removed

TANK STRAP BIB REMOVABLE POCKET XC, XR victory motorcycle blue led

805 A Clinch Ave Clinton Tennessee 37716

To Install Victory Motorcycle Tank Strap:

PLEASE READ THROUGH AND UNDERSTAND THESE INSTRUCTIONS BEFORE BEGINNING.

USE A REMOVABLE THREAD LOCK ON ALL FASTENERS

INSTALLATION:

1. REMOVE BOTH SIDE COVERS LOCATED NEXT TO THE PASSENGER PEGS/BOARDS FROM THE BIKE AND SET ASIDE.

2. USING A M6 ALLEN WRENCH REMOVE THE TWO BOLTS THAT HOLD THE SEAT TO THE BIKE.

3. REMOVE THE SEAT BY LIFTING THE FRONT AND PULLING UP. SET ASIDE.

4. UNLOCK THE FUEL CAP ON THE TANK AND USING A M4 ALLEN WRENCH REMOVE THE FOUR SCREW ATTACHING IT TO THE TANK. NOTE THAT ONE OF THE

SCREWS IS INSIDE UNDER THE CAP. THEN REMOVE THE FUEL CAP FROM BIKE.

5. CLEAN THE ENTIRE TANK AND REMOVE ANY DIRT AND BUGS IN THE AREA THE TUXEDO TIE IS GOING TO COVER. LET DRY.

6. USING RUBBING ALCOHOL AND A LINT FREE TOWEL CLEAN THE AREA ON THE BACK OF THE TANK WERE THE SEAT MEETS IT.

7. USING RUBBING ALCOHOL AND A LINT FREE TOWEL CLEAN THE FLAT AREA ON THE FRONT UNDERSIDE OF THE TANK JUST ABOVE THE FRAME. LET DRY.

8. INSTALL THE FRONT PIECE OF HOOK ON THE SURFACE YOU JUST CLEANED. PRESS DOWN FIRMLY.

9. TAKE THE TUXEDO TIE AND INSERT THE FUEL CAP ASSEMBLY FROM THE TOP THROUGH THE LARGE ROUND HOLE. CENTER IN THE HOLE.

10. PLACE THE TUXEDO TIE AND FUEL CAP ON THE BIKE AND START THE THREADS ON THE FOUR ALLEN SCREW YOU REMOVED IN STEP 2. DO NOT TIGHTEN.

11. ROTATE THE TUXEDO TIE ON THE TANK TO ALIGN THE CENTER OF THE TANK WITH THE CENTER OF THE TUXEDO TIE. TIGHTEN THE ALLEN SCREWS.

12. STARTING WITH THE FRONT PULL EACH TAB TIGHT AND ATTACH IT TO THE HOOK YOU INSTALLED IN STEP 8.

13. REMOVE THE MASKING FROM THE TWO REAR PIECES THAT ARE STILL ATTACHED TO THE BACK OF THE TUXEDO TIE.

14. TAKE THE BACK AND PULL EACH TAB TIGHT AND ATTACH IT TO THE AREA ON THE BACK OF THE TANK YOU CLEANED. PRESS FIRMLY TO MAKE SURE THE

TAPE IS TIGHT ON THE TANK. MAKE SURE THE CENTER STRIPE ON THE TUXEDO TIE IS CENTERED ON THE BACK OF THE TANK.

15. REINSTALL THE SEAT AND THE SIDE COVERS.

16. INSTALL THE POUCH.

17. LET TAPE CURE FOR 24 HOURS BEFORE USING THE BIKE.

 

Victory Only Motorcycle carries Show Chrome Victory Motorcycle Accessories including TANK STRAP BIB REMOVABLE POCKET XC, XR with the largest stock of performance mods, upgrades, custom equipment gear, apparel, OEM replacement and aftermarket parts and accessories for Victory Motorcycles with international worldwide shipping to Canada, UK, CZ, GB, Australia and anywhere a Vicory Motorcycle rider wants to do it yourself customizing of a show quality bike. If you are looking for Chrome or Black Contrast Cut billet aluminum accessories. Just shop Victory Only and Owens Cycle Works website for retail purchases or dealer wholesale orders for Victory’s parts


Tank Strap Bib Steel Frame Cruisers

Additional information

Weight 1.75 lbs