Description

Gerbing Gyde 7V Men’s S4 Camouflage Heated Gloves

Keep your hands warm and extend your time outdoors with the S4 Heated Gloves. This full-length gauntlet glove keeps the elements at bay and premium insulation locks the heated warmth in for as long as you need. A Cyberian Cordlocâ„¢ system keeps the glove secure and the touchscreen compatible index finger allows you to use your smartphone anytime. Control the temperature via the three-level silicone switch built into the glove.
Gerbing Gyde Heated Gloves Include:
2pc – 7V Rechargeable Lithium-ion Battery Pack (25.16Wh)
1pc – Dual Battery Wall Charger
Detailed Instructions
Gerbing Lifetime Warranty
Gerbing Gyde S4 Heated Glove Features:
Premium twill outer shell with Cyberian Cordloc system
TPU molded cinch strap
Chamois Thumb and goggle squeegee
Three-level silicone switch
AQUATEX breathable water-resistant membrane
Primaloft insulation with 270 grams on top of hand and 170 grams on palm
Equipped with (2) dual mode 7 volt battery and a dual wall charger
Touchscreen compatible index finger
Battery has 4 heat-settings as indicated by lights and Heat Times:
100% (4 red/blue lights) – 2 Hours
75% (3 red/blue lights) – 3 Hours
50% (2 red/blue lights) – 5 Hours
25% (1 red/blue lights) – 8 Hours
Blue Sync Mode for Glove Onboard Button Control
Charging Battery:
We recommend charging overnight for first charge.
Charge 100% before use (a full charge takes about 3 hours).
A red light will appear on wall charger when charging.
The red light will change to green when charged.
Maintain at least 25% power when battery is not in use. This practice will prolong the life of any 7V battery.
Each heated glove features an on-board temperature control button that regulates the temperature with three optimum heat levels. The 7.4V lithium battery is secured in a pocket on the top side of the gauntlet for increased freedom of motion during almost any outdoor activity.

Instructions for Silicone Switches:
Step 1: Plug in fully charged battery.
Step 2: Switch will cycle through settings, this indicates switch has power and can now be used.
Step 3: To power on, push and hold down button for 2-3 seconds until the switch illuminates.
Step 4: To change power setting, tap button to cycle through levels.
Low = Green
Medium = Yellow
High = Red
Step 5: To power off, push and hold down button until light goes out.

 

Gerbing Gyde 7V Men’s S4 Camouflage Heated Gloves

Additional information

Size

, , , ,