Dual Tour Saddle for Victory Vegas Jackpot by Corbin


SKU: N/A Categories: ,


Dual Tour Saddle for Victory Vegas Jackpot by Corbin

Please note Corbin Seats Average a 6 week Lead Time

This new design Dual Touring Saddle provides you and a passenger with sculpted seating and long range comfort with the luxurious addition of electric seating heaters. Our generously contoured platforms provide better weight distribution to eliminate pressure points and give long range support. This is the perfect saddle setup for touring quality comfort on your new Vegas.

Corbin’s Dual Tour accepts two removable rider’s backrests! Each backrest is fully adjustable for a tailored fit to rider posture. Use a single backrest and transfer it front to rear as needed or you can order two backrests for full time use in your saddle. Just like our saddles, the Corbin backrest is ergonomically shaped to fit the contour of your body for maximum contact area and support. Saddle must be removed in order to set the safety screw in the passenger backrest.

In the front we have engineered the backrest to fold down to make it easier to mount the bike. Corbin’s backrest hardware is spring loaded to make the rest pop back upright after you throw your leg over. This special hardware (internal to the saddle) also allows the backrest position fore and aft to be adjusted to your profile. This enables the backrest to be completely customized to fit your riding posture (see instructions below).

For the ultimate in luxury, we have built electric seat heaters into our Dual Touring saddle design. A single switch controls the heat for both the rider and passenger positions. The switch is conveniently located along the left side of the saddle so you can reach it without taking your hand off the throttle. The two-position switch allows you to select a heat level depending on conditions. The level of heat is controlled automatically by a thermostat built into the control unit. This setup is very simple to install into your Victory Vegas wiring.

Our new Ovalbac style backrest gives a very cool look and a nice ride. As mentioned, the shaping is designed to cradle the arch of your back and give you excellent support without a pressure point on your spine. The Oval cutout means it won’t trap heat against your body and makes an excellent hand hold for your passenger while riding or for you while moving your bike in the garage. A variety of finishing plate options are available for the rear of the rest to give a totally customized look.

Dual Touring Saddle also accepts our chrome “V-rail” for an added nostalgic touch. Show quality chrome plating provides a nice touch of class. V-rail mounts directly to the Corbin saddle for simple installation that does not require drilling or brackets.

We use genuine leather in all of our seat models to provide a luxurious ride that breathes with your body. A wide range of leather options is available for a custom look to suit your taste. Leather will break in along with your foam shape to give you a personalized fit and will age gracefully with proper care. Take good care of your leather seat with a quality conditioner like Corbin’s Saddle Cream. Your seat will look nice for years and show character just like your leather jacket.

NOTE: This saddle does not fit the Custom Ness Jackpot motorcycle.

Corbin Adjustable Backrest
Another Corbin Invention
Corbin backrests are designed to install and remove easily so you can use a single backrest transferred front to back as needed or get two for full time use. Just slide the backrest shaft into the hardware contained inside the saddle and lock it in place with a single safety screw.

Backrests adjust to rider profile easily without removing the rest from the seat. In some saddles we incorporate special hardware in the front position that allows the backrest to fold down to ease mounting the bike. This hardware also allows you to position the backrest fore and aft to suit your stature.

Of course, all backrests are made to coordinate with your Corbin saddle in your choice of materials. Ovalbac models also have finishing plate options for the rear to add a bit more flair. Need a little storage? Check out Corbin’s new Glovebox that bolts directly up to your backrest in place of the finishing plate and adds four liters of storage!

GENUINE LEATHER: We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.

PATENTED MANUFACTURING TECHNOLOGY: Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material

ERGONOMIC SHAPING: A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle’s foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue. In a nutshell… more comfort for a longer ride!

COMFORT CELL® FOAM: The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn’t break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!

FIBERTECH™ BASEPAN: A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our base pans as flat as possible so bumps or odd shapes don’t telegraph through the foam to your body.
Rider Seating: Approx. 14.5" wide x 17" long Passenger Seating: Approx. 11.25" wide x 10" long Seat height: 26.5"

Victory Jackpot Seat Shown with optional Side Rail and Backrest * Studs can be added or removed

jackpot corbin seat Rider Seating: Approx. 14.5" wide x 17" long Passenger Seating: Approx. 11.25" wide x 10" long Seat height: 26.5"

Victory Jackpot Seat Shown with optional Side Rail * Studs can be added or removed

jackpot corbin seat Rider Seating: Approx. 14.5" wide x 17" long Passenger Seating: Approx. 11.25" wide x 10" long Seat height: 26.5"

Victory Jackpot Seat Shown with optional Side Rail and Backrest * Studs can be added or removed

SADDLE WARRANTY: Base pan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters, Coolers and workmanship are warranted for one year. Product will only be authorized to be shipped back for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).

International Customers. Shipping is calculated as close as possible if an adjustment needs to be made either more or less than collected we will contact you prior to finalizing the order. The order can be canceled if enough shipping is not collected. We do not collect for duties or import charges as we have no way to know what other countries will change.

Dual Tour Saddle for Victory Vegas Jackpot by Corbin

Additional information

Weight 20 lbs
Dimensions 36 × 18 × 18 in

, ,